At contractor’s option, Plaster-Weld® and a white skim coat of plaster may be applied on interior ceilings, walls, beams and columns in place of smooth or rubbed concrete surfaces as shown or specified. Naturally, all the details can t be given in a 17-minute video, but we do try. Plaster-Weld The original plaster bonding agent is a patented formulation incorporating polyvinyl acetate homopolymer.
PLASTER WELD PLASTER BONDING AGENT PROFESSIONAL
Reapply Plaster-Weld® over areas not satisfactorily covered.Īpply a white skim coat of plaster 1/16 to 3/16 inch thick over Plaster-Weld® direct to concrete ceilings and other structural surfaces as shown and specified (the mixing, application and finishing of white coat shall be as specified for regular white finish coat). This video explains Duluting some stucco bonding agents to professional plastering contractors. Inspection of bonding agent: Prior to applying plaster, inspect bonding agent application to assure a continuous pink film over the entire bonding surface. Application of wallpaper to newly bonded plastered surfaces should be delayed 90 days. Wait 60 days before applying bonding agent over newly painted surfaces. Glossy painted surfaces should be dulled with an abrasive. Designed for exterior and interior use, Weld-Crete will bond new con crete, portland cement plaster, and cementitious mixes to structurally sound concrete.
(NOTE: Painted surfaces must be sound, washable and firmly adhered to the substrate.
Polyweld is a copolymer emulsion designed for use as a bonding agent for concrete. Application of bonding agent: Apply Plaster-Weld® uniformly using brush roller, or spray to form a continuous pink film over the entire surface. Form release agents, curing compounds, hardeners, and sealers must be compatible with Plaster-Weld®.Īpplication of bonding agent: Apply Plaster-Weld® uniformly using brush roller, or spray to form a continuous pink film over the entire surface. Copolymer Emulsion Bonding Agent for Concrete, Plaster, Stucco. Form release agents, curing compounds, hardeners, and sealers must be compatible with Plaster-Weld®.
PLASTER WELD PLASTER BONDING AGENT FREE
Surfaces to receive Plaster-Weld® Must Be Structurally Sound And Clean, free from loose material, dust, dirt, oil, grease, wax, loose paint, mildew, rust, laitance, or efflorescence.
0 kommentar(er)
